Warning Cookies are used on this site to provide the best user experience. If you continue, we assume that you agree to receive cookies from this site. OK
 

Airwrap Fitting Instructions

Please choose your product for Airwrap Mesh and Airwrap Deluxe fitting instructions:

 

AIRWRAP 4 Sides Fitting Instructions

Contains 2 pieces:

1 x Long - for the 3 fixed sides
1 x Short - for the drop-side

Attach short piece to drop-side or cot front rail

  1. Place inside cot/crib with grip tape facing the slats, see photo 1.
  2. Wrap one end on the last slat (not the corner).
  3. Loop end around single slat only, as in photo 2. to ensure maximum grip tape contact.
  4. Fasten top and bottom grip tape evenly to ensure a firm fit.
  5. Pull and do the same at the other end.
  6. Ensure AIRWRAP is even on both sides.
  7. Tighten by readjusting either end until AIRWRAP is fitted firmly and securely.
  8. The bottom edge of the AIRWRAP should sit just under the surface level of the mattress.

Attach long piece to remaining three sides

  1. Place inside cot/crib with grip tape facing the slats, see photo 1.
  2. Wrap one end on the last slat (not the corner) or nearest the drop/front side.
  3. Loop end around single slat only, as in photo 2. to ensure maximum grip tape contact.
  4. Fasten top and bottom grip tape evenly to ensure a firm fit.
  5. Weave through corners using option A or B.
    Most cots will suit option A. Option B is a better option for larger cots/cribs. See below for examples of both options.
  6. Pull and repeat steps 2, 3 and 4 at the other end.
  7. Ensure AIRWRAP is centered with each side having equal lengths of grip tape attached.
  8. Tighten by readjusting either end until AIRWRAP is fitted firmly and securely.
  9. The bottom edge of the AIRWRAP should sit just under the surface level of the mattress.

 

IMPORTANT

There are many cot/crib types available. Please ensure this product is suitable for your cot. Please ensure it is fitted according to instructions at all times while baby is in the cot. If this product is loose, it may pose an entanglement risk. If AIRWRAP™ can not be fitted securely to your cot, please do not use.

EASY FITTING TIP

Attach pieces well higher than the mattress, once at desired tension, slide AIRWRAP™ down the rails, to sit just below the mattress level.

USING A FLAT SHEET AND BLANKET

Position AIRWRAP™ below mattress surface level after tucking baby in. This will assist in keeping AIRWRAP™ at desired height during sleep time.

top of page

 

AIRWRAP 2 Sides Fitting Instructions

Contains 2 pieces:

1 x - for the drop-side
1 x - for the rear side

Provides side rail protection only

Attach short piece to drop-side or cot front rail

  1. Place inside cot/crib with grip tape facing the slats, see photo 1.
  2. Wrap one end on the last slat (not the corner).
  3. Loop end around single slat only, as in photo 2. to ensure maximum grip tape contact.
  4. Fasten top and bottom grip tape evenly to ensure a firm fit.
  5. Pull and do the same at the other end.
  6. Ensure AIRWRAP is even on both sides.
  7. Tighten by readjusting either end until AIRWRAP is fitted firmly and securely.
  8. The bottom edge of the AIRWRAP should sit just under the surface level of the mattress.

Attach second short piece to rear side rail

  1. Place inside cot/crib with grip tape facing the slats, see photo 1.
  2. Wrap one end on the last slat (not the corner).
  3. Loop end around single slat only, as in photo 2. to ensure maximum grip tape contact.
  4. Fasten top and bottom grip tape evenly to ensure a firm fit.
  5. Pull and do the same at the other end.
  6. Ensure AIRWRAP is even on both sides.
  7. Tighten by readjusting either end until AIRWRAP is fitted firmly and securely.
  8. The bottom edge of the AIRWRAP should sit just under the surface level of the mattress

 

IMPORTANT

There are many cot types available. Please ensure this product is suitable for your cot. Please ensure it is fitted according to instructions at all times while baby is in the cot. If this product is loose, it may pose an entanglement risk. If AIRWRAP™ can not be fitted securely to your cot, please do not use.

EASY FITTING TIP

Attach pieces well higher than the mattress, once at desired tension, slide AIRWRAP™ down the rails, to sit just below the mattress level.

USING A FLAT SHEET AND BLANKET

Position AIRWRAP™ below mattress surface level after tucking baby in. This will assist in keeping AIRWRAP™ at desired height during sleep time.

top of page